[mk_edge_slider first_el=”true” swiper_bg=”#000000″ parallax=”true” orderby=”post__in” animation_effect=”kenburned” direction_nav=”none” slides=”9504″]


AVL DITEST Scope 1200

This two-channel measurement unit features only the most essential functions, offering easy handling and a high degree of mobility. Measurement results can be accessed by connecting the device to a PC or tablet.


Exemplary Hardware

  • Galvanically isolated channels and also between measurement unit and PC
  • Differential measurement channels
  • Guided connection of sensors using Active Probe Supply with color guide
  • Automatic zero calibration and demagnetisation (degaussing)
  • Guaranteed long-term measurement accuracy of 5 years without calibration
  • Automotive Sensors
  • Stable and ultra-lightweight magnesium housing with rubber protectors

Sophisticated Software

  • Intuitive and self-explanatory interaction
  • More than 400 pre-configured measurements
  • Automatic sensor recognition
  • Guided measurement steps; Explained connections and detailed descriptions
  • Automatic measurement range configuration
  • Direct reference curve comparison
  • Curve recorder function


  • Galvanically isolated inputs
  • 2 differential oscilloscope measurement channels, each with 40 MS/s
  • Active Probe Supply with Color Guide
  • Voltage Measurement to 500 VDC/250 VAC
  • Current measurement from 1 mA to 1800 A AC/DC
  • Resistance measurement from 0.1 Ω to 10 MΩ
  • Resolution: Scope 14 bit, digital multimeter 16 bit
  • Independent channel bandwidth and sampling rate

Galvanic isolation between AVL DITEST SCOPE and PC

The galvanic isolation protects the components of the AVL DITEST Scope from shorts caused by electrical breakdowns and ground loops. This prevents ground loops when measuring on grid-connected points (e.g. socket) and on the PC. Defect components in the vehicle or instrument are thereby excluded.

An example

During fault finding a battery charger is connected to the vehicle and the PC is connected to a plug socket. Through the grounded electrical connections of the charger and the PC, with traditional instruments, a ground loop can be established, which can lead to incorrect measurements or may cause damage to components. This is prevented from happening with the galvanic isolation.

Differential measurement channels

The differential measurement channels allow measurement with 40 MS/s and the full bandwidth. Each channel is independently available from the others – so current, resistance and voltage measurements can be carried out in parallel. Short circuits and incorrect readings during the measuring process are thus ruled out.

Tips from the workshop

You can, for example, measure the battery voltage on channel 1 whilst measuring the lambda sensor-heater’s voltage supply on channel 2. The combination of non-differential measurement channels and incorrect polarity would result in short circuit. This is prevented with the AVL DITEST SCOPE SERIES.



Basis Set

  1. AVL DiTEST Scope 1200 Modul
  2. Power supply with cable
  3. USB cable
  4. 2 x cable URD
  5. 2 x test probes red&black
  6. 2 x crocodile clips red&black
  7. Current clamp 600A
  8. CD manual
  9. Transport case
  10. Packing
scope 1200 set

Standard Set

  1. AVL DiTEST Scope 1200 Modul
  2. Power supply with cable
  3. USB cable
  4. 2 x cable URD
  5. 2 x test probes red&black
  6. 2 x crocodile clips red&black
  7. Current clamp 100A Standard
  8. Current clamp 1800A
  9. CD manual
  10. Transport case
  11. Packing




Technical specifications


The proven AVL DITEST SCOPE software user interface can be operated intuitively without any training. All measurements are supported by displaying guided steps as well as explanations for connections and detailed descriptions. Setting and connection errors are not possible thanks to the automatic sensor detection and the colour guide