SCOPE 8400
TODO EN UNO
El scope mas completo.

ALL IN ONE

AVL DITEST SCOPE 8400

Fully integrated 4-channel measurement unit with touchscreen infotainment and testing. The AVL DITEST SCOPE 8400 consists of a “Rugged Windows 7 PC” with a firmly connected measurement unit and can be integrated in the networked workshop via SCPI commands. The test results can be accessed directly via the display with a comfortable user interface.

FUNCTIONS AT A GLANCE

Exemplary Hardware

  • Galvanically isolated channels and also between measurement unit and PC
  • Differential measurement channels
  • Stimuli Generator for active amplification
  • Guided connection of sensors using Active Probe Supply with colour guide
  • Automatic zero calibration and demagnetisation (degaussing)
  • Guaranteed long-term measurement accuracy of 5 years without calibration
  • Automotive Sensors
  • Stable and ultra-lightweight magnesium housing with rubber protectors

Sophisticated Software

  • Intuitive and self-explanatory interaction
  • More than 400 pre-configured measurements
  • Automatic sensor recognition
  • Guided measurement steps; Explained connections and detailed descriptions
  • Automatic measurement range configuration
  • Direct reference curve comparison
  • Curve recorder function

KEY BENEFITS

  • Galvanically isolated inputs
  • 4 differential oscilloscope measurement channels, each with 40 MS/s
  • Touchscreen controlled measurement interface with intuitive GUI
  • Active Probe Supply with Colour Guide
  • Fully integrated infotainment test (Bluetooth, USB, WLAN, video)
  • Windows® 7 Tablet PC
  • Voltage Measurement to 500 VDC/200 VAC
  • Current measurement from 1 mA to 1800 A AC/DC
  • Resistance measurement from 0.1 Ω to 10 M
  • Pressure measurement from -1 bar to 100 bar
  • Measurement temperature of -20 ° C to 200 ° C
  • Fully functional signal generator for voltages from -20 V to +40 V
  • Two built-in high-resolution pressure sensors (e.g. for cylinder synchronisation in motorcycles)
  • Guided measurement steps for faultless diagnostic processes

Galvanic isolation between AVL DITEST SCOPE and PC

The differential measurement channels allow measurement with 40 MS/s and the full bandwidth. Each channel is independently available from the others – so current, resistance and voltage measurements can be carried out in parallel. Short circuits and incorrect readings during the measuring process are thus ruled out.

An example

During fault finding, a battery charger is connected to the vehicle and the PC is connected to a plug socket. Through the grounded electrical connections of the charger and the PC, with traditional instruments, a ground loop can be established, which can lead to incorrect measurements or may cause damage to components. This is prevented from happening with the galvanic isolation.

Differential measurement channels

The differential measurement channels allow measurement with 40 MS/s and the full bandwidth. Each channel is independently available from the others – so current, resistance and voltage measurements can be carried out in parallel. Short circuits and incorrect readings during the measuring process are thus ruled out.

Tips from the workshop

You can, for example, measure the battery voltage on channel 1 whilst measuring the lambda sensor-heater’s voltage supply on channel 2. The combination of non-differential measurement channels and incorrect polarity would result in a short circuit. This is prevented with the AVL DITEST SCOPE SERIES.

INCLUDED IN DELIVERY

AVL DITEST SCOPE 8400 incl. Win7 Tablet

  1. Power supply with cable
  2. USB cable
  3. LAN cable
  4. Video Cable
  5. 2 x Cable URD red/black
  6. Stimuli wire set
  7. 2 x test probes red & black
  8. 2 x crocodile clips red & black
  9. Clamp I150 High End
  10. Current clamp I1800
  11. Temperature sensor -20 ° to 200 ° C
  12. Pressure sensor -1 bar to 100bar
  13. 2 x connection hoses for 2 internal low pressure sensors from -0.8 to 2 bar
  14. Trigger clamp
  15. KV Clip
  16. Transport case
  17. CD/Manual/packaging
scope 8400 contentenido

SUPPORT & DOWNLOADS

Brochures

 

Technical specifications

AVL DITEST SCOPE SOFTWARE

The proven AVL DITEST SCOPE software user interface can be operated intuitively without any training. All measurements are supported by displaying guided steps as well as explanations for connections and detailed descriptions. Setting and connection errors are not possible thanks to the automatic sensor detection and the colour guide.

scope sensore
Contáctanos

Mandemos un mensaje lo contactaremos a la brevedad posible.

Not readable? Change text.

Start typing and press Enter to search